Fire Connection
C16WHITTIER, CA 90606
(562) 695 7356View profileLicensed under Class C-16 (Fire Protection)
Find CSLB-licensed fire protection contractors in Whittier, CA. Every listing shows an active licence number you can check yourself.
Fire Protection Contractors in other cities
Check any licence yourself in one click. When you are ready, tell us about the job and we will connect you.
Get matched with a licensed proFire protection work in Whittier spans residential sprinklers, commercial alarm tie-ins and retrofit systems in older buildings. Hydraulics, pipe sizing and head coverage are calculated — not guessed — and those calculations are what the inspector checks.
A retrofit in an occupied building means coordination with ceilings, finishes and sometimes asbestos surveys. Ask how the contractor phases work so living or business space stays usable, and who patches after head installation.
Post-installation flow tests prove heads cover the room as designed. Ask whether the contractor attends the acceptance test with the fire inspector or subcontracts that visit.
Class C-16 (Fire Protection) is the fire protection specialty — CSLB authorizes contractors to install and repair fire suppression systems. It is not a general building or plumbing licence, though coordination with both is common. Fire alarm tie-ins may need a separate low-voltage contractor even when sprinklers are in scope, so ask who wires the flow switch.
Each listed contractor holds an active Class C-16 (Fire Protection) licence at a Whittier address. Fire work also faces local fire marshal review beyond CSLB, so ask who submits plans. Fire department connection locations must remain accessible after landscaping is finished, and the contractor should flag that during design. Hydraulic calculations should be stamped before ordering pipe because field changes are expensive.
The register does not show whether a firm designs in-house or outsources calculations. Ask who stamps the hydraulic calc package and whether it is included in the quote. Annual inspection tags on commercial systems are separate from the initial install permit, and the owner should know who services the system.
Residential sprinklers in remodels sometimes need a dedicated backflow device on the supply. Ask whether plumbing upgrades are in the fire contractor scope or a separate line item.
Every licence number below links to its record at cslb.ca.gov, where you can confirm status and expiry yourself.
11 registered in Whittier · 574 active CLEAR licences across Los Angeles County · page 1 of 24
Rather have us narrow it down?
Tell us what the job is and we will point you to licensed fire protection contractors in Whittier.
Get matchedCheck the licence
Open the CSLB record from any listing below and confirm the licence is active and the classification matches the work. It takes seconds and it is the one thing you can verify without asking anyone.
Call three recent references
Ask each contractor for three jobs finished in the last year, then actually call them. Ask what went wrong and how it was handled — every project has something, and the answer tells you more than a list of successes.
Tell us about the job
Send us the scope and we will connect you. No account, no fee, and we do not sell your details on.
Licence first. References second. Reviews last. Why that order.
Get matched with a licensed proSprinkler installation requires Class C-16 (Fire Protection). Plumbing contractors may not perform suppression work unless they also hold the fire protection classification.
The register lists 11 with an active Class C-16 (Fire Protection) licence at a Whittier address, and 574 across Los Angeles County.
Plan check and inspection for suppression systems typically route through City of Whittier and the local fire authority. The contractor should name both in the submittal schedule.
Trigger thresholds depend on project scope, occupancy and local amendments. City of Whittier makes that call — not the contractor marketing page.
Hydraulic demand may require a meter upgrade. The fire contractor should coordinate with the water utility early in design.