A & S Glass Inc
C17LOS ANGELES, CA 90019
(323) 468 9203View profileLicensed under Class C-17 (Glazing)
Find CSLB-licensed glass and glazing contractors in Los Angeles, CA. Every listing shows an active licence number you can check yourself.
Los Angeles neighbourhoods
Check any licence yourself in one click. When you are ready, tell us about the job and we will connect you.
Get matched with a licensed proGlazing work in Los Angeles covers more than broken panes. Storefront systems, shower enclosures, structural glass and energy-rated window replacements each have different anchoring and sealant requirements, and wind load rules matter on taller façades.
Retrofit windows sold on price alone often skip flange detailing and flashing integration. Water intrusion shows up years later as drywall stains. Ask how the installer ties the new unit into existing weather barriers.
Coastal exposure in some Los Angeles neighborhoods favors corrosion-resistant fasteners and sealants rated for UV. Specify hardware grade when quoting west- or south-facing openings.
Class C-17 (Glazing) is the glazing classification for setting glass in any kind of frame or building front. CSLB separates it from general carpentry even when the opening is rough-framed by someone else. Tempered glass cannot be field-cut after manufacture, so field measurements must be final before the order is placed.
Contractors listed hold an active Class C-17 (Glazing) licence at a Los Angeles address with numbers linked to the register. Verify status before ordering custom-sized units with long lead times. Low-emissivity coatings face a specific direction, and reversing the unit in the opening reduces energy performance. Measure openings after stucco repair settles because rough openings change more than glass tolerances allow.
A licence does not guarantee someone carries proper suction cups and edge protection on site. Ask what happens if a unit cracks during setting — replacement cost should be addressed in writing. Argon gas loss in dual-pane units happens if seals fail, and installation damage can void the glass warranty before the first season.
Retrofit windows in stucco buildings need pan flashing integrated with the water-resistive barrier. Cutting stucco without a flashing plan invites bulk water behind the new frame.
Every licence number below links to its record at cslb.ca.gov, where you can confirm status and expiry yourself.
84 registered in Los Angeles · 603 active CLEAR licences across Los Angeles County · page 1 of 26
Rather have us narrow it down?
Tell us what the job is and we will point you to licensed glass & glazing contractors in Los Angeles.
Get matchedCheck the licence
Open the CSLB record from any listing below and confirm the licence is active and the classification matches the work. It takes seconds and it is the one thing you can verify without asking anyone.
Call three recent references
Ask each contractor for three jobs finished in the last year, then actually call them. Ask what went wrong and how it was handled — every project has something, and the answer tells you more than a list of successes.
Tell us about the job
Send us the scope and we will connect you. No account, no fee, and we do not sell your details on.
Licence first. References second. Reviews last. Why that order.
Get matched with a licensed proClass C-17 (Glazing) covers installation and repair of glass in windows, doors, storefronts and related applications. Structural steel erection is a different classification.
The register shows 84 with an active Class C-17 (Glazing) licence at a Los Angeles address, and 603 across Los Angeles County.
Altering openings or changing egress often requires plan check through LADBS. Like-for-like glass in an existing frame may be exempt — confirm for your address.
Many glazing contractors prefer to measure and order so liability for fit stays with one party. Split responsibility is where sizing disputes start.
Safety glazing must bear permanent marks where code applies. Inspect labels before accepting the job as complete.