Preferred Suppliers / National Hardwood Flooring & Moulding / Moulding & Trim
National Hardwood Flooring & Moulding has supplied moulding and trim to contractors, homeowners, and designers across Southern California since 1984. Its Van Nuys showroom stocks hardwood moulding in redwood, poplar, oak, maple, cherry, mahogany, and walnut, alongside MDF and primed MDF options — plus custom profile matching for renovation and historic-home projects.
Rated 4.9/5 from 11 Houzz reviews — Best of Houzz 2017, NWFA affiliate
The right material depends on the installation environment, whether the trim will be painted or stained, and budget.
MDF Moulding
Medium-density fiberboard, manufactured from wood fibers bonded with resin. Machines to consistent profiles without grain variation and accepts paint well. Costs less than hardwood, but isn’t recommended for moisture-exposed areas like bathrooms, high-humidity kitchens, or exterior applications.
Hardwood Moulding
Milled from solid species — oak, maple, poplar, cherry, mahogany, walnut, and redwood in National Hardwood’s stock. Accepts stain and clear finish so the grain stays visible, resists impact better than MDF in high-traffic areas, and can be refinished over time. Costs more than MDF but lasts longer.
Primed MDF
Arrives with a factory-applied primer coat, cutting prep time and giving consistent paint adhesion. A common choice for new construction and renovation projects with painted-trim specifications.
National Hardwood stocks profiles for standard residential and commercial applications, plus custom sizing on request.
Heights from 3" to 7" in colonial, ranch, contemporary, and custom profiles. Available in MDF, primed MDF, oak, maple, poplar, and specialty hardwoods. Taller baseboards suit higher ceilings and formal rooms; standard 3"–4" fits most residential applications.
Colonial, craftsman, ranch, and contemporary styles, 2-1/4" to 3-1/2" wide, in MDF and hardwood. Matching casing to baseboard profiles keeps trim consistent throughout a space.
Profiles from 2-1/4" up to 6"+ in traditional cove, ogee, dentil, and contemporary styles. Smaller profiles suit standard 8-foot ceilings; larger sizes fit taller ceilings without losing proportion.
Installs at chair-back height to protect walls and mark a visual transition point. Panel moulding builds decorative wall frames and wainscoting. Stocked in both MDF and hardwood.
Sourcing moulding and flooring separately is a common way projects end up with a near-match that reads as an error rather than a design choice. National Hardwood stocks moulding in the same hardwood species available for flooring, and the team can advise on stain matching when coordinating with previously installed floors.
Older and historic homes often use moulding profiles no longer in standard production — a common challenge in Craftsman bungalows, Spanish Colonial and Revival homes, and Mid-Century properties throughout the LA market. National Hardwood can match an existing profile by creating a custom knife set for its moulding equipment — bring a sample to the Van Nuys showroom for a profile-matching consultation. Custom work is available in oak, maple, poplar, walnut, cherry, mahogany, and other hardwood species, in both finger-jointed (painted applications) and solid (stained or clear-finished) configurations.
Licensed contractors and flooring professionals qualify for trade pricing on volume orders, with delivery coordinated throughout Los Angeles County, Ventura County, and the surrounding area. National Hardwood's staff can also assist with material takeoffs from project specifications and floor plans.
Contractors & Installers
Trade pricing is available for licensed contractors. National Hardwood has supplied the Los Angeles construction and renovation trade since 1984, and the Van Nuys location is set up for contractor sourcing — not just retail walk-ins. Call ahead or visit the showroom to establish a trade account.
Interior Designers & Architects
The team can provide samples, profile drawings, and lead times to support a specification. Custom profiles can be produced for projects requiring exact matches to existing or specified details.
Homeowners
The Van Nuys showroom is open to the public. Staff can help you understand what profiles work with your flooring, your ceiling height, and your home’s architectural style.
Moulding and trim is one part of National Hardwood's inventory. Return to the full National Hardwood Flooring & Moulding supplier hub to browse solid and engineered hardwood flooring, stairs, decking, and every other product category in one place.
Yes. National Hardwood stocks moulding in the same species available for flooring, including red oak, white oak, walnut, and maple. This makes it straightforward to coordinate trim with a floor installation, whether working with raw material or prefinished product.
Custom profile production is available for projects where standard profiles won’t match existing trim — a common situation in Craftsman bungalows, Spanish Revival homes, and other pre-war architecture throughout LA. Contact the showroom with measurements or a sample to discuss options.
Yes. National Hardwood offers trade pricing for licensed professionals. Contact the showroom directly or visit in person to set up a trade account.
Both raw and prefinished options are stocked depending on species and profile. The team can advise on which option fits a given project and finish requirements.
No. National Hardwood Flooring & Moulding is a preferred supplier partner of True Local Pros — they supply materials, not installation services. If you need a licensed hardwood flooring installer, use the True Local Pros contractor finder on this page.
In addition to moulding and trim, National Hardwood stocks solid and engineered hardwood flooring, custom staircases, decking, fencing, siding, ceiling planks, and tools and sundries — see the full supplier hub for every category.
Mon – Fri: 7:30am – 5:00pm
Saturday: 8:00am – 3:00pm
Sunday: Closed