110 Pro HVAC Inc
C20ENCINO, CA 91316
(818) 590 6886View profileLicensed under Class C-20 (HVAC)
Find CSLB-licensed hvac contractors in Encino, CA. Every listing shows an active licence number you can check yourself.
HVAC Contractors in other cities
Check any licence yourself in one click. When you are ready, tell us about the job and we will connect you.
Get matched with a licensed proHVAC work in Encino sits at the intersection of comfort, energy code and electrical load. Replacing a furnace with a heat pump is not a swap — line sets, breaker size and duct capacity all have to be evaluated on site.
Title 24 compliance applies to most equipment changes in California. A contractor who quotes equipment only, without mentioning permit and compliance documentation, is leaving half the job undefined.
Zoning mismatches — one thermostat controlling two sun exposures — show up as comfort complaints after install. Ask how the contractor proposes to split zones on your floor plan.
Class C-20 (HVAC) — warm-air heating, ventilating and air-conditioning — is the CSLB classification for installing and servicing HVAC equipment. It is separate from refrigeration for commercial coolers and from electrical for panel work. Return air pathways through closed doors and short duct runs affect noise and efficiency as much as equipment SEER ratings.
Each contractor here holds an active Class C-20 (HVAC) licence recorded at a Encino address. Equipment swaps in Encino typically need permits through LADBS, so confirm that path is in the quote. Refrigerant line insulation in unconditioned spaces prevents condensation that damages ceilings below the line set route. Ask for a room-by-room load summary because oversized equipment short-cycles and undersized equipment never catches up.
The register cannot tell you whether a firm sizes ducts with a calculation or rules of thumb. Ask to see the load calculation for your house before equipment is ordered. Duct sizing that is too small for the blower creates noise and frozen coils, and load calculations should justify register sizes.
Mini-split line sets have maximum run lengths and elevation limits. A layout that hides the condenser far from the air handler may exceed manufacturer limits and void warranty.
Every licence number below links to its record at cslb.ca.gov, where you can confirm status and expiry yourself.
29 registered in Encino · 2,851 active CLEAR licences across Los Angeles County · page 1 of 119
Rather have us narrow it down?
Tell us what the job is and we will point you to licensed hvac contractors in Encino.
Get matchedCheck the licence
Open the CSLB record from any listing below and confirm the licence is active and the classification matches the work. It takes seconds and it is the one thing you can verify without asking anyone.
Call three recent references
Ask each contractor for three jobs finished in the last year, then actually call them. Ask what went wrong and how it was handled — every project has something, and the answer tells you more than a list of successes.
Tell us about the job
Send us the scope and we will connect you. No account, no fee, and we do not sell your details on.
Licence first. References second. Reviews last. Why that order.
Get matched with a licensed proInstalling or servicing HVAC equipment requires Class C-20 (HVAC). Electrical circuit work may need coordination with a C-10 contractor depending on scope.
The register lists 29 with an active Class C-20 (HVAC) licence at a Encino address, and 2,851 across Los Angeles County.
Most HVAC change-outs in Encino require permits and Title 24 compliance forms filed with LADBS. Unpermitted work can complicate a future sale.
Ducts with collapsed sections, asbestos wrap or mold growth are candidates for replacement. Sealing is appropriate when the layout is sound but leaky.
Duct leakage tests are part of Title 24 compliance on many projects. Ask whether sealing and testing are included, not assumed.